PWM solar controller 40A 50A

PWM solar charger controller with full protection for battery. Suitable for solar power system application.

Model	CP-12/24V 40A-50A
Rated charging current	40A/50A
Rated load current	20A
System voltage	12V；×2/24V
Solar input	＜25V；×2/50VDC
Solar input	50A=600Wp/12V;1200Wp/24V
Overload, short circuit protection	1.25 times the rated current 60sec times the rated current for 5 seconds overload protection actions. ≥ 3 times the rated current short-circuit protection action
No-load loss	≤15 mA
Charging circuit voltage drop	Not more than 0.26V
Discharge circuit voltage drop	Not more than 0.15V
Overvoltage protection	17V，×2/24V；
Working temperature	technical grade：-35℃to +55℃；
Boost charging voltage	14.6V；×2/24V； (hold time：30min)（only when there is a discharge call）
Direct charge voltage	14.4V; ×2/24V； (hold time：30min)
Floating charging	13.6V; ×2/24V；(hold time: until reduce to charging return voltage action)
Charging return voltage	13.2v； ×2/24V；
Temperature compensatio	– 5 mv / ℃ / 2 v (ascension, direct charging, floating, charging to return to voltage compensation);
Undervoltage voltage	12.0V； ×2/24V；
Discharge voltage	11.1 V – discharge rate compensation correction of the initial discharge voltage (no-load voltage); × 2/24 v；
Discharge to return to voltage	12.6V；×2/24V；
Control mode	Charging for PWM pulse width modulation